n features l all or nothing relay l ul, csa, vde, sev, fimko, semko, ?ve, bsi recognized l working class: c l type of service: continuous duty l heavy duty 16 a miniature power relay l ul class b (130c) insulation l high isolation in small package insulation distance: 8 mm dielectric strength: 5,000 vac (between coil and contacts) surge strength: 10,000 v l low power consumption and high sensitivity type available vsb-s) l plastic sealed (with tape) type available l rohs compliant since date code:0523 please see page 6 for more information vsb series power relay 1 pole16 a (heavy power control) 1 rohs compliant (a) series name vsb : vsb series (b) nominal voltage refer to the coil data chart (c) coil type nil : standard type (700 to 750 mw) s : high sensitivity type (530 mw) (d) contact arrangement m : 1 form a (spst-no) t : 1 form c (spdt) (e) enclosure b : flux free type c : plastic sealed type (with tape) note: actual marking omits the hyphen (-) of (*) n ordering information vsb C 12 s t b [example] (a) (*) (b) (c) (d) (e) to be discon tinued
vsb series nominal coil resistance must operate must release nominal model voltage (10%) voltage* voltage* power vsb- 3 ( ) ( ) 3 vdc 12.5 ? 2.1 vdc 0.3 vdc 720 mw vsb- 5 ( ) ( ) 5 vdc 36 ? 3.5 vdc 0.5 vdc 700 mw vsb- 6 ( ) ( ) 6 vdc 50 ? 4.2 vdc 0.6 vdc 720 mw vsb- 9 ( ) ( ) 9 vdc 115 ? 6.3 vdc 0.9 vdc 700 mw vsb- 12 ( ) ( ) 12 vdc 200 ? 8.4 vdc 1.2 vdc 720 mw vsb- 14 ( ) ( ) 14 vdc 280 ? 9.8 vdc 1.4 vdc 700 mw vsb- 18 ( ) ( ) 18 vdc 460 ? 12.6 vdc 1.8 vdc 700 mw vsb- 24 ( ) ( ) 24 vdc 820 ? 16.8 vdc 2.4 vdc 700 mw vsb- 36 ( ) ( ) 36 vdc 1,850 ? 25.2 vdc 3.6 vdc 700 mw vsb- 48 ( ) ( ) 48 vdc 3,300 ? 33.6 vdc 4.8 vdc 700 mw vsb- 60 ( ) ( ) 60 vdc 5,100 ? 42.0 vdc 6.0 vdc 700 mw vsb-100 ( ) ( ) 100 vdc 13,400 ? 70.0 vdc 10.0 vdc 750 mw vsb- 3s ( ) ( ) 3 vdc 17 ? 2.1 vdc 0.3 vdc 530 mw vsb- 5s ( ) ( ) 5 vdc 47 ? 3.5 vdc 0.5 vdc 530 mw vsb- 6s ( ) ( ) 6 vdc 68 ? 4.2 vdc 0.6 vdc 530 mw vsb- 9s ( ) ( ) 9 vdc 155 ? 6.3 vdc 0.9 vdc 530 mw vsb- 12s ( ) ( ) 12 vdc 270 ? 8.4 vdc 1.2 vdc 530 mw vsb- 14s ( ) ( ) 14 vdc 370 ? 9.8 vdc 1.4 vdc 530 mw vsb- 18s ( ) ( ) 18 vdc 610 ? 12.6 vdc 1.8 vdc 530 mw vsb- 24s ( ) ( ) 24 vdc 1,100 ? 16.8 vdc 2.4 vdc 530 mw vsb- 36s ( ) ( ) 36 vdc 2,450 ? 25.2 vdc 3.6 vdc 530 mw vsb- 48s ( ) ( ) 48 vdc 4,400 ? 33.6 vdc 4.8 vdc 530 mw vsb- 60s ( ) ( ) 60 vdc 6,800 ? 42.0 vdc 6.0 vdc 530 mw vsb-100s ( ) ( ) 100 vdc 18,560 ? 70.0 vdc 10.0 vdc 530 mw coil data chart standard type high sensitivity type note: all values in the table are measured at 20c. *: specifed values are subject to pulse wave voltage to be discon tinued
vsb series n specifications item standard type vsb- ( ) high sensitive type vsb-( )-s contact arrangement 1 form a (spst- no) or 1 form c (spdt) material silver alloy (agsno) rjudwlr single resistance (initial) 0d[lpppdw9 rating 16 a, 250 vac / 30 vdc maximum carrying current*1 16 a maximum switching rating 4,000 va / 480w maximum switching voltage 250 vac / 150vdc maximum switching current 16a maximum switching load*2 100 ma 5 vdc coil nominal power (at 20oc) 700 to 750 mw 530 mw operate power (at 20oc) 350 to 370 mw 260 mw operating temperature -40oc to +65oc (no frost) -40oc to +75oc (no frost) time value operate (at nominal voltage) maximum 15ms release (at nominal voltage) maximum 10ms life mechanical 2 x 10 7 operations minimum electrical 1 x 10 5 operations minimum (contact rating) other vibration resistance misoperation 10 to 55 hz, at double amplitude of 1.5 mm endurance 10 to 55hz, at double amplitude of 1.5 mm shock resistance misoperation min. 100m/s 2 (111ms) endurance min. 1,000m/s 2 (61ms) weight approximately 18g * 1 need to consider the head from pcb when max. current is more than 10a. * 2 0llppvlwfkljordgvphwlrhgderhduhuhihuhfhdohv3ohdvhshuirupwkhfrupdwlrwhvwlwkwkhdfwdo load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. type compliance contact rating ul ul 508, 873 e56140 flammability: ul 94-v0 (plastics) 16a, 250vac/30vdc (resistive) 1/3 hp, 250vac/125vac pilot duty: c150 csa c22.2 no. 14 lr 35579 vde 0435, 0631, 0700, 0860 n safety standards n insulation item vsb note resistance (initial) 0llpp0 at 500 vdc dielectric strength open contacts 1,000 vac (50/60 hz) 1 min. coil and contacts 5,000 vac (50/60 hz) 1 min. surge voltage (coil and contact) 10,000 v 1.2 x 50s standard wave complies with sev, semko, fimko, ?ve, bsi to be discon tinued
vsb series n characteristic data n reference data to be discon tinued
vsb series n dimensions l dimensions l schematics (bottom view) l pc board mounting hole layout (bottom view) vsb-m type vsb type vsb-mc type (plastic sealed type with tape) vsb-c type (plastic sealed type with tape) unit: mm to be discon tinued
6 vsb series 1. general information l now. all of our signal and power relays are lead-free. please refer to lead-free status info. kwwsifdlimlwvfrpsgi/hdg)uhh/hwwhusgi l lead free solder paste currently used in relays is sn-3.0ag-0.5cu. from february 2005 forward sn-3.0cu-ni will be used for ftrb3 and ftr-b4 series relays. l all signal and power relays also comply with rohs. please refer to individual data sheets. relays that are rohs compliant do not contain the 6 hazardous materials that are restricted by rohs directive (lead, mercury, cadmium, chromium iv, pbb, pbde). l ,wkdvehhhulhgwkdwvljohdgiuhhuhodvlohdghgdvvhpeosurfhvvloorwfdvhd problems (compatible). l lf is marked on each outer and inner carton. (no marking on individual relays). l we will ship leaded relays as long as the leaded relay inventory exists. . recommended lead free solder profle l recommended solder paste sn-3.0ag-0.5cu and sn-3.0 cu-ni (only ftr-b3 and ftr-b4 from february 2005) rohs compliance and lead free relay information refow solder condition . moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical realys. . tin whisker l snagcu solder is known as low riskof tin whisker. no considerable length whisker was found by our in-house test. . solid state relays l each lead terminal will be changed from solder plating to sn plating and nickel plating. a layer of nickel plating is between the terminal and the sn plating to avoid whisker. we highly recommend that you confrm your actual solder conditions flow solder condition: uhhdwlj pdlpp soldering: dip within 5 sec. at vrohuedwk solder by soldering iron: soldering iron 7hpshudwuh pd[lpp duration: maximum 3 sec. to be discon tinued
vsb series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://www.fujitsu.com/us/services/edevices/components/ europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international eadquarter ffces ?2009 fujitsu components america, inc. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. fujitsu components america or its affliates do not warrant that the content of datasheet is error free. in a continuing effort to improve our products fujitsu components america, inc. or its affliates reserve the right to change specifcations/datasheets without prior notice. rev. june 30, 2009 to be discon tinued
|
